M O R E   T H A N   F I R E D O O R S
|
|
|
|
|
|
|
|
 
 

Accessories for glazings

Treatments

Treatments for exterior use

When glazed doors are used in locations exposed to direct UV rays from sunlight or internal lighting, special glass protection and coloration/paint is available to adapt to this environment. The side of the glass that requires special treatment will need to be specified (the glazing bead side or the opposite side). If left unspecified, the special treatment will be applied to the side opposite to the glazing bead (hinged side). A sticker will be applied to indicate the protected side for purposes of assembly and installation.
Glazed doors for external environments should always be protected from water.

Treatments for exterior use
Treatments for exterior use

Treatments

Film

To reduce or prevent external visibility while maintaining optimal internal visibility, all fire-rated glasses may be equipped with opacifying or covering films (black or white) that have been designed for the purpose. The side of the glass that requires special treatment will need to be specified (the glazing bead side or the opposite side).
If left unspecified, the film will be applied to the opposite side of the glazing bead (non-hinged side).

Film
Film

Optional devices

Three-sided subframe

Subframe ready for installation or assembly for one-leaved, two-leaved and complex glazed doors made of steel. Includes spacers that can be disassembled and anchors for mortar fixing.

Four-sided subframe

Subframe ready for installation or assembly for fixed glazings with block frame. Includes spacers that can be disassembled and anchors for mortar fixing.

Optional devices

Door closer

Door closers serve to ensure the automatic closing of glazed doors and allow for the regulation of closure force, speed and final impact. Door closer products are addressed by EU directive 89/106/CEE, which means they are subject to CE marking.

Types:

  • CP1 with scissor arm: marked CE in conformity with EN 1154. As standard, one- or two-leaved glazed steel doors are equipped with an overhead CP1 door closer with a silver colored scissor arm. The CP1 is suited for use on fire rated glazed doors and has been classified for 180° closure with a force level of 3 or 4. Installation holes are pre-drilled into the leaf and frame.
  • CP2 with slide channel: marked CE in conformity with EN 1154. The CP2 overhead door closer with slide channel is suited as standard for the aluminium one-leaved glazed doors and on request for steel glazed doors. Relative to the CP1, the advantage of this system is the absence of a protruding arm. The CP2 is suited for use on fire rated glazed doors and has been classified for 180° closure with force level 4. Glazed doors ordered with CP2 are provided with pre-drilled installation holes on the door leaf and the frame.
  • CP2-EMF with slide channel and electro-mechanical check: marked CE in conformity with EN 1154 and EN 1155. The CP2-EMF differs from the CP2 in that it has an electro-mechanical hold-open device that allows the door leaf to be locked at an angle ranging from 80° to 120°. During alarms or power outages, the hold-open device is unlocked and the door is closed by the door closer. The CP2-EMF can be used on fire rated glazed doors and has a maximum opening range of 120°, with a closing force set at 4. Glazed doors ordered with CP2-EMF are provided with predrilled installation holes on the door leaf and the frame.
CP1 with scissor arm, CP2 with slide channel
CP1 with scissor arm, CP2 with slide channel

Optional devices

Closing regulators

Closing regulators administer the closure of two-leaved doors so that the inactive leaf is overlaid on the active leaf upon final closure. This is why it is mandatory to apply closing regulators to all two-leaved fire doors.

Types:

  • SR390 closing regulator: the SR390 closing regulator device is distinct from the door closer and is a standard element of fire rated glazed steel doors with two leaves. CE marked in conformity with EN 1158.
  • RC2 system: CE marked in conformity with EN 1154 and EN 1158. The RC2 closing regulator system is suited as standard for the aluminium two-leaved glazed doors and on request for two-leaved steel glazed doors. The RC2 closing regulator system is incorporated into the door closer, and consists of 2 CP2 with force EN 4 with a slide channel and a regulator integrated into the upper sliding guide. The entire system is silver colored.
  • RC2-EMF1/RC2-EMF2 systems: CE marked in conformity with EN 1154, EN 1158 and EN 1155. The RC2-EMF1 system differs from the RC2 in that it has an electro-mechanical hold-open device that allows the door leaf to be locked at an angle ranging from approx. 80° to 130°. The active leaf is held open by the closing regulator system at an angle ranging up to max 150°.
    Moreover the system RC2-EMF2 comes with two electromechanical hold-open devices which can either arrest just the active or both leaves up to an angle ranging for each leaf of between 80° to 130°.
    In case of fire alarm or power outage the hold-open device, or both devices release the leaves, which are then closed by the door closer.
Closing regulator, SR390 and RC2 system
Closing regulator, SR390 and RC2 system

Optional devices

Panic bar EXUS®

  • Newly designed product with a state-of-the-art technological concept
  • Available in different color and surface combinations: brushed stainless steel for the lever arms and the bar, or aluminum with polished chrome lever arms and anodized aluminum bar, and finally the classic combination that never goes out of style - black plastic lever arms with anodized aluminum bar
  • Certified for internal locks with 40 mm entrances for single leaves or active leaves, with 30 mm entrances for inactive leaves and with up to 45° spindle rotation
  • Locking by key possible on the bar side as well
  • Reversible for Right or Left mounting
  • Protrusion 125 mm
  • Proposed together with the door or separately in a complete KIT packaged in a black/yellow box
  • Label applied to the packaging to identify the product's characteristics
  • Wide range of variations to personalize: colored bar, special encrypted or mastered cylinders
Panic bar EXUS®, LP, LA, LX
Panic bar EXUS®, LP, LA, LX

Optional devices

Panic bar FAST TOUCH

  • Reversible for right or left opening
  • For application to single leaf and two-leaved doors
  • Painted aluminum/aluminum alloy carters
  • Painted aluminum bar that can be shortened down to 300mm on any model
  • Galvanized steel internal components suited for fire doors
  • The lock is anti-panic/fire rated for Euro profile cylinders
Panic bar FAST TOUCH
Panic bar FAST TOUCH

Access control

ELM/CISA multi-voltage electric handle

Controlled door opening system that employs an electronic device to activate the handle.

ELM/CISA multi-voltage electric handle
ELM/CISA multi-voltage electric handle

Access control

Panic bars for combination with electric handle

Controlled opening is only possible for the 'pull' direction side (side on which the electric handle is installed) when combined with panic bars.

Panic bar Fast Touch and Panic bar EXUS
Panic bar Fast Touch and Panic bar EXUS

Access control

Controlled opening system

This system is for use in special situations when the glazed doors remain closed and should only be opened with electrical consent.

Controlled opening system
Controlled opening system